Patinetes
Tablas
Patines
BMX
Invierno
Ropa
Surf
Ofertas
Entrega 4 días laborables
365 días para la devolución
Descripción
U-Bow Alpinist de Marker para fijaciones Alpinist pintech.
Una herramienta disponible en tres niveles de firmeza diferentes:
- Blanda = aproximadamente 5.5DIN
- Media = aproximadamente 8DIN
- Dura = aproximadamente 11DIN
Especificaciones de este modelo
| Modelo | Peso |
| Soft | 32g |
| Medium | 35g |
| Hard | 40g |
Especificaciones
Mejor Uso:
Touring
Reseñas (10)
 Comprador verificado |
|
| "El envio del producto impecable. En cuanto al producto en sí , el montaje del producto en la fijación es bastante mas complicado de lo que parece. Ademas, el folleto de instrucciones no aclara este punto. Valoracion negativa para Marker" | |
| XAVIER MARTI IGUAL (RUBI) | 01/21/2019 |
Respuesta de SkatePro: Lamentamos su mala experiencia con el producto. Nos puede contactar para que le podamos aconsejar de cómo montarlo si todavía no lo hubiese conseguido :-) Un saludo / Soraya |
|
| Comprador verificado |
|
| "The Marker U springs arrived faster than expected, and are exactly as advertised." | |
| Kenneth Linden (Irvine) | 01/19/2021 |
| Comprador verificado |
|
| "Have not had a chance to test them, not enough snow yet, but have no reason to believe they would not work. Got them to replace the "hard" DIN 12 bows that came with my bindings. They certainly were a bitch to install though. Not like the manufacturer describes it, just remove the small screw and slide it out/slide it in. The prongs are not quite parallel but rather convergent a bit. At the end I managed to spread them a little by forcing a suitable size of a socket wrench in between of them." | |
| Karol S. (Northport) | 10/28/2019 |
| Comprador verificado |
|
| "Quick delivery from the US to Canada and exactly as ordered. Flawless shopping experience! My tip to install, use a fairly big set of those quick adjust pipe wrench that opens to 2” gap or so. Just press them into position and use them to get the old ones half way out. Easy peezy." | |
| Flavelle Scott (Mount Currie) | 01/27/2021 |
| Comprador verificado |
|
| "Completely agree with Karol below. Nightmare to install. Had to file the inner edge a bit to get them on, after various failed attempts started to chew up the plastic/carbon body of the binding. The cut ends of the springs are pretty unrefined and could do with a bit of filing before they leave the factory. Once on, they work fine, I'm sure, and I got a swift and sensible reply from Skatepro when I asked for advice, so overall a positive experience. Would certainly use this retailer again." | |
| Archie Gillies (Aberdeen) | 11/12/2020 |
