Size chart & sizing guide Roces

Measure your foot length (Mondopoint) to find the corresponding size. The displayed Mondopoint values are measured in-house and may differ from the official size chart from the manufacturer. We recommend using our measurements to find the right size.

Feedback from our customers:

suitable for slightly narrower feet

Conversion chart - Find your size

Foot length	Mondopoint	US Men	US Women	US Kids	EU size
5.7"	145 mm	7Y	-	7Y	23
6.3"	160 mm	8Y	-	8Y	24
6.5"	165 mm	9Y	11Y	-	25
6.7"	170 mm	10Y	12Y	-	26
6.9"	175 mm	11Y	13Y	-	27
7.1"	180 mm	11.5Y	13.5Y	-	28
7.3"	185 mm	12Y	1	-	29
7.5"	190 mm	13Y	2	-	30
7.9"	200 mm	13.5Y	2.5	-	31
8.1"	205 mm	1	3	-	32
8.3"	210 mm	2	4	-	33
8.5"	215 mm	2.5	4.5	-	34
8.7"	220 mm	3	5	-	35
8.9"	225 mm	3.5	5.5	-	35.5
9.1"	230 mm	4	6	-	36
9.3"	235 mm	4.5	6.5	-	37
9.4"	240 mm	5	7	-	38
9.6"	245 mm	5.5	7.5	-	38.5
9.8"	250 mm	6	8	-	39
10.0"	253 mm	6.5	8.5	-	39.5
10.0"	255 mm	7	9	-	40
10.1"	257 mm	7.5	9.5	-	40.5
10.2"	260 mm	8	10	-	41
10.4"	265 mm	8.5	10.5	-	41.5
10.6"	270 mm	9	11	-	42
10.8"	275 mm	9.5	11.5	-	42.5
11.0"	280 mm	10	12	-	43
11.2"	285 mm	10.5	12.5	-	44
11.4"	290 mm	11	13	-	45
11.5"	293 mm	11.5	13.5	-	45.5
11.6"	295 mm	12	14	-	46
11.8"	300 mm	12.5	-	-	46.5
12.0"	305 mm	13	-	-	47
12.1"	307 mm	13.5	-	-	47.5
12.2"	310 mm	14	-	-	48
12.4"	315 mm	15	-	-	49
12.8"	325 mm	16	-	-	50
13.2"	335 mm	17	-	-	51
13.6"	345 mm	18	-	-	52

Notice: This brand does not use the same sizing guide for all products. Please check the sizing guide we show on each product.

How to Measure

Follow the instructions below and compare your measurements with the size chart

Foot length

Place your foot against a wall and measure the distance from the wall to the tip of your toes.

Manufacturers do not always use the same sizes for shoes. Therefore, we recommend using the foot length to find the correct size. The international standard for foot length is known as Mondopoint and indicates the size of the foot in millimeters (mm).

Tip! Use a soft measuring tape, to ensure that the product fits properly. Alternatively, use a piece of string and then measure it against a ruler