Description
Rocker 3+ The Knight is the upgraded 2019 model that comes with extra durability and finesse - all while weighing less.
High-end Mini BMX with freecoaster for maximum backward fun
- Roll backward without the need to pedal backward thanks to its freecoaster hub
- Light frame, bars, and fork made from hi-tensile steel
- The regular gearing makes it easy to generate momentum and getting into speed
- Perform smaller grinds and tricks with the included plastic pegs
- Maintain your chrome cranks easy thanks to its 3-piece design
Notice:
- The bike is delivered 80% assembled. All parts must be tightened before use.
- When using a freecoaster hub you will find that it takes a while longer before you start gaining momentum when pedaling. This is called "slack" and can be adjusted in 4 different configurations for much slack to very little. All this can be done without removing the wheel.
- Mini Bikes are NOT meant for road-riding nor transportation. They're meant for closed tracks or for having fun at the skate park.
Compatible parts
Find products compatible with Rocker 3+ The Knight Mini BMX Bike:
Specifications
Total height:
70cm (27.5")
Hub:
Freecoaster, Sealed bearings
Bar height:
10"
Bar width:
28"
Weight:
22lbs
Frame Top Tube:
12"
Headset type:
Integrated 1 1/8"
Frame material:
Hi-ten steel
Headtube length:
100mm
Gear ratio:
28/9
Axle diameter:
12mm
Stem type/Length:
Top load
Crank Length/Type:
120mm, Three-piece
Crank material:
Steel
Pedal axle diameter:
9/16"
Wheel diameter:
10"
Wheel type:
Air tire
Seat:
Combo
Seatpost Length:
110mm
Pedal material:
Plastic
Max rider weight:
220lbs
Assembly:
Partly assembled
reviews (22)
Verified Buyer | |
"Paid for item to be Item to be built, happy with assembly. Was exactly as shown in photograph, my son loved it and will no doubt have hours of fun with it." | |
Caroline grant (Airdrie) | 12/30/2019 |
Verified Buyer | |
"My son was the happiest boy on Christmas Day he loved it so did most of the adults great bike looks amazing too" | |
Amie Ashford (Ipswich) | 12/27/2019 |
Verified Buyer | |
"You forgot to add my assembly kit that I paid for. The pegs on back were bent by the time the bike arrived because you hadnโt packaged it properly - not happy !" | |
Brooke Quinn (Banstead Village Ward) | 10/14/2019 |
Reply from SkatePro: Thank you for your review. The assembly kit is not a physical kit but a service we provide in our workshop. The bike arrives in 1 complete product to you and ready to ride! :) I see that we have reshipped a complete bike for you due to the damaging during the transport. ๐ We will make sure that everything will arrive in a better way now. Our apologies. /Justin |